In this six-hour workshop you will learn how to use the Routermax 1325 CNC milling machine at MotionLab.Berlin. This machinery allows you to prototype 3D parts through subtracting material by planing and milling parts of it. By the end of the session, you will have milled a series of parts from plywood that can be assembled.

This workshop is the last module of the series CAD-CAM-CNC Milling. If you do not have experience designing in Autodesk Fusion 360 and its CAM module, we strongly recommend you to attend before the Introduction to CAD design with Autodesk Fusion 360 and Autodesk Fusion 360 CAM for CNC Machining workshops.

Learning outcome

During the workshop you will learn how to:

• Create a CNC-G-Code with Estlcam, and transfer it to the CNC machine

• Use the control software MACH 3

• Operate the Routermax 1325 CNC machine safely

By the end of the session, you will have the opportunity to present a project of your own to the instructor, and review the plan you have for milling it.

Completing this workshop, with the corresponding membership, will grant you the possibility to use the CNC milling machine at MotionLab.Berlin.

Prerequisites

For this course you will need:

• A laptop with Estlcam pre installed (Download a free-trial version of the software here: estlcam.de)

• A mouse with a scroll wheel

• It is mandatory to watch the videos on these playlists before you take part in the workshops

Workshop preparation playlist (English)

Workshop preparation playlist (German)

Other materials for the workshop will be provided to you and are included in the price.

This workshop is held in English, and in German at specific request.